Close this search box.
Close this search box.

Enerdrive B-TEC 125AMP 12V G2 Lithium Battery

Original price was: $2,023.00.Current price is: $1,599.00.

Dimensions 318W X 165D X 232H Weight 15.5Kg

Pre order

  Shipping calculated at checkout
SKU: EPL-125BT-12V Category: Tags: , , , , ,


The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.

The Enerdrive Enerdrive B-TEC  G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

    Battery Capacity

    Battery Voltage

    Battery Current (Amps)

    Battery State of Charge (SOC)

    Battery State of Health (SOH)

    Battery Status

    Individual Cell Voltage

    Battery Temperature

    Battery Cycles

    Battery Alarms

    Battery Event Information

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY

Size & Weight Savings
Lithium v AGM Capacities;

  • 125Ah Lithium = 200Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.

With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.


Please Note: This  B-TEC lithium battery is capable to be paralleled to a second  B-TEC lithium battery. For maximum performance and lifespan of your lithium battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

Specifications: SKU EPL-125BT-12V Battery Voltage 12V Amp Hours (ah) 125 Battery Length (mm) 318 Battery Width (mm) 165 Battery Height (mm) 232 Battery Weight (kg) 15.5 Model EPL-125BT-12V G2 Nominal Voltage 12.8V Nominal Capacity 125Ah Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles Battery Charge Temperature 0 ̴ 45°C Normal Charge Voltage CV/CC*14.20 ̴ 14.60V Standby (Float) Voltage 13.50 ̴ 13.80V Maximum Charge Current 60A @ 25°C for 30mins Recommended Charge Current for Maximum Life 20~60A Battery Discharge Temperature -20 ̴ 60°C Battery Output Voltage Range 11.00 ̴ 14.60V Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins Pulse Discharge Current 450A for 1.0s Discharge Cut-off Voltage ≤11.20V Over-Charge Protection Per Cell 3.90V ± 0.03V Over-Charge Release Per Cell 3.60V ± 0.05V Over-Charge Release Method Discharge below release voltage Over-discharge Protection Per Cell 2.80V ± 0.05V Over-discharge Release Per Cell 3.20V ± 0.05V Over-discharge Release Method Apply Charge/Voltage ≥12.8V Discharge Over Current 110A for 30s – 450A for 1s Battery Manual Reset Button Yes Protection Reset Time Approx 10s Auto Release Over Current Release Method Disconnect Load Battery Charge Over Temperature Protection to 55°C ± 5°C, Release at 45°C ± 5°C Battery Discharge Over Temperature Protection to 65°C ± 5°C, Release at 50°C ± 5°C Short Circuit Protection Auto release after 5s Case Construction Hi Impact ABS Plastic Temperature & Humidity Range≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH, ≥ 90 days -10°C ̴ 45°C, 5 ̴ 75% RH

Click here to download

No video available.

Shopping Cart
Enerdrive B-TEC 125AMP 12V G2 Lithium Battery
Original price was: $2,023.00.Current price is: $1,599.00.

Pre order

  Shipping calculated at checkout