Close this search box.
Close this search box.

Enerdrive ePOWER Smart Battery Charger 20Amp AC 12V

Original price was: $551.00.Current price is: $359.00.

Dimensions 295W X 206D X 86H Weight 2.4Kg

In Stock

  Shipping calculated at checkout

ePOWER Battery Charger Features:

Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks

Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three

Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3

Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator)

Smart Charging: The ePOWER battery charger will regulate its output based on the loads connected to your battery banks

Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz

LED Display: Easy to use “set and select” menu along with scrolling charger status

Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours

Temperature Sensor: Battery temperature sensor included with 3 meter cable

5 Year Warranty from an Australian company renowned for customer support


SKU EN31220

Output Current Rating (Amps) 20

Model EN31220

Product Type 12v 20Amp Battery Charger

Ingress Protection IP32 (Basic drip proof in vertical orientation)

Float 13.4 – 13.8 V

AC Input Voltage 90 to 265 VAC

DC Output Three (1 fully independent, 2 common with diode isolation)

DC Output Ground Single Heavy Duty Common Ground Stud

Battery Temp Sensor Port RJ12 (standard battery temp. sensor supplied)

Reverse Polarity Yes, (with user replaceable fuse/s)

Over Temperature Protection Yes, unit de-rated and shutdown

Equalize 16.0 V

Storage Range (temp) -40° to 70° C

Power consumption (DC 12V) 350W (Full Load)

Charging Control Four stages (Bulk/Absorption/Float/Maintenance) Two stages (Bulk/Absorption), Constant Power Supply (Program setting), Priority Battery Bank Charging

Output System Voltage 12V

Operating Range (temp) -20° to 60° C

Charger Voltage 12V

Humidity 5-95%, relative humidity non-condensing

Net Weight (kg) 2.4

DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread

Output Short Circuit Yes, (with user replaceable fuse/s)

Power Factor Correction Yes

Temperature Setting Hot, Normal, Cold (no sensor connected)

Charger Mode Output Voltage 14.2 – 15.5 V

Charger Efficiency > 82%

AC Input Operating Range 207-265 Vac (2.0 A Max)90-125 Vac (3.8 A Max)

Standby Current < 2 mA LCD Display Charging status, Battery Voltage, Output Current & Fault Codes. Dimensions 295 x 206x 86 mm (L x W x H) Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations. AC Input Connection IEC with Supplied 1.2M Power Lead Over Charge Yes, unit shutdown AC Input Frequency Range 47 – 63 Hz Selectable Battery Type Gel, AGM, Flooded, Lithium, Program Optional Accessories Remote Digital Display / Enerdrive Part Number EN3REM Cooling Forced air ventilation (thermo controlled fan)

AC-Charger-Combination-Manual-Rev-5.5_2023_WEB (Click here to download)

No video available.

Shopping Cart
Enerdrive ePOWER Smart Battery Charger 20Amp AC 12V
Original price was: $551.00.Current price is: $359.00.

In Stock

  Shipping calculated at checkout